Jlg 10MSP Operator Manual Manual de usuario Pagina 18

  • Descarga
  • Añadir a mis manuales
  • Imprimir
  • Pagina
    / 96
  • Tabla de contenidos
  • MARCADORES
  • Valorado. / 5. Basado en revisión del cliente
Vista de pagina 17
SECTION 1 - SAFETY PRECAUTIONS
1-8 – JLG Lift – 3121227
Keep non-operating personnel at least 6 ft. (1.8m) away
from machine during all driving operations.
Limit travel speed according to conditions of ground sur-
face, congestion, visibility, slope, location of personnel,
and other factors causing hazards of collision or injury to
personnel.
Be aware of stopping distances in all drive speeds.
Do not drive at high speeds in restricted or close quarters
or when driving in reverse.
Exercise extreme caution at all times to prevent obstacles
from striking or interfering with operating controls and per-
sons in the platform.
Ensure that operators of other overhead and floor level
machines are aware of the aerial work platform’s pres-
ence. Disconnect power to overhead cranes.
Warn personnel not to work, stand, or walk under a raised
platform. Position barricades on floor as necessary.
1.4 LIFTING, AND HAULING
General
Never allow personnel in platform while lifting, or hauling.
This machine should not be towed in the event of emer-
gency, malfunction, power failure, or loading/unloading.
Lift only with a fork lift truck using the designated fork lift
pockets in the machine’s base frame.
Ensure platform is fully retracted and completely empty of
tools prior to lifting or hauling.
When lifting machine with a forklift, position forks only at
designated areas of the machine. Lift with a forklift of ade-
quate capacity.
Refer to the Machine Operation section of this manual for
lifting information.
Vista de pagina 17
1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 95 96

Comentarios a estos manuales

Sin comentarios